How to Sew a Simple Medical Mask

You might want to wear a fabric medical mask to help prevent the spread of the COVID-19 coronavirus. Additionally, sewing and donating fabric masks is a great way to help healthcare providers who are on the front lines of the pandemic. Although fabric masks aren’t as effective as medical-grade masks, they may provide some protection against germs.^[1] Fortunately, these masks are very simple to make, even if you're just learning to sew. If you have a bit more sewing experience, you can create a medical mask with a more complex design.

[Edit]Steps

[Edit]Simple Mask Template

Simple Medical Mask Template

[Edit]Cutting Your Fabric

1. Clean your hands and work area before making a mask. When you’re making a medical mask, it’s important to use good hygiene. Wash your hands with soap and water for at least 20 seconds to make sure they’re clean. Additionally, use bleach wipes or a bleach spray to disinfect your tools and work surface.^[2]
   
   
   
   • If you’re making masks to donate to health care providers, consider wearing a face mask while you make them. This way you won’t accidentally breathe, cough, or sneeze on the masks you’re making.
2. Pick a heavy-weight, tight-woven fabric, such as cotton. A tight weave will provide better protection from germs. Use a cute decorative fabric if you have it. However, you can also use a heavy-weight T-shirt or pillowcase if that’s all you have.^[3]
   
   
   
   • You may be able to get free supplies from a local fabric or craft store if you’re donating the masks. For instance, Joann Fabrics will provide the materials you need to make masks for donations, free of charge.^[4]
3. Print and cut out the CDC-approved pattern. Click this link to access the pattern: https://www.coxhealth.com/innovation/masks/. Check that the pattern will print at the actual size, then print it out and double-check the scale to make sure it’s right. Use your scissors to cut out the fabric.^[5]
   
   
   • If you don’t have a printer, just cut out a rectangle that’s wide x tall. Then, reference the pattern as a guide while you’re working. This mask is pretty easy to make.
4. Trace the pattern onto your fabric and cut it out. Lay the fabric on your work surface with the “good” side facing down. Place the pattern on the fabric, then use a pencil or fabric chalk to trace around it. Finally, use fabric scissors (or sharp scissors) to cut out the rectangle.^[6]
   
   
   • Keep the pattern nearby because it’ll help you figure out where to fold the fabric when you’re making the body of the mask.
5. Cut two strips of fabric to use for ties. Using fabric ties makes it easier to construct your mask, as you need fewer materials. Additionally, you can easily adjust the fit of your mask by tightening or loosening the ties. Use fabric scissors to cut your ties.^[7]
   
   
   • If you have fabric with different patterns or colors, you might want to use a different fabric for your straps. or wide. Cut two strips of elastic for each mask.^[8]}}

[Edit]Making the Mask

1. Fold the top edge of the backside over a fabric tie. Place the fabric you're using for the mask body on your workspace with the "good" side down. Lay the first fabric tie down on the top of the rectangle. Make sure the fabric strip is centered so that there’s an equal length on either side of the mask. Then, fold the top edge of the backside of the mask over the fabric strip.^[9]
   
   
   • To make sure your straps stay in place, line up the rough edge of the fabric with the bottom of the fabric strip.
2. Sew along the top to secure the fabric strip. Use your sewing machine or a needle and thread to do straight stitches along the rough edge of the fabric. Go all the way across from 1 end of the fabric to the other. Leave the sides open so you can insert a wire.^[10]
   
   
   • This stitch will hold the fabric tie in place and leave a small tunnel at the top of the mask.
3. Insert metal floral wire into the pocket at the top of the mask. Cut about of floral wire. Slide the metal wire into the tunnel you just created when you stitched down the top strap. Use your fingers to push the wire into place at the top of the mask. This wire will allow the wearer to adjust the mask around their nose.^[11]
   
   
   • If you don’t have any metal wire, use a twisty tie. Just strip off the paper first, as it will come off in the wash if you don’t.
4. Make 3 small folds over the center of the mask to create pleats. The pleating helps the mask contour to the wearer's face. Make the first fold about below the top of your mask. Then, make another fold and pin the pleat in place. Repeat the process once more to create a total of 3 pleats. Leave about of fabric at the bottom so you can attach the other strap.^[12]
   
   
   • Use the mask pattern as a guide for making your pleats.
5. Stitch up the sides of the mask to secure the pleats and wire. Once you’ve folded all of the pleats, fold the edges of the front side of the fabric about over to the back. Then, sew straight stitches up each side to create side seams. Not only will this secure your pleats, but it’ll also prevent the nose wire from falling out.^[13]
   
   
   • Don’t forget to use the pattern for reference.
6. Fold the bottom over the second fabric strip. Lay the second fabric strip over the bottom of the mask. Make sure the strip is centered so that there will be equal amounts of strap on either side of the mask. Then, fold the lower edge of the backside of the mask over the fabric strip. Line up the rough edge of the fabric with the top edge of the strip. Then, sew straight stitches along the rough edge to secure the mask around the bottom strap.^[14]
   
   
   • This is exactly like the first step for making the mask. of the backside of the mask up and sew along the rough edge using a straight stitch to make another tunnel. Starting on the right side, insert the free end of the elastic you attached at the top of the mask into the tunnel and use straight stitches to sew it in place. Then, repeat on the left side. This will create 2 ear loops on either side of the mask.^[15]}}
7. Sew a topstitch around the perimeter of the mask twice to secure it. Use your sewing machine or a hand sewing needle and thread to complete the topstitch. This will reduce the risk of your mask fraying or coming apart.^[16]
   
   
   • You can skip the topstitch if you’re in a hurry. However, your mask will hold up better in the wash if you add a topstitch.
8. Wash your mask before wearing it. Your mask won’t be able to protect you from germs if it’s dirty. To sanitize it, wash it in detergent on a hot setting. Then, dry it in your dryer for best results.^[17]
   
   
   
   • If necessary, you can air-dry your mask. However, heat will kill more germs, so using a dryer is your best bet.
   • If you don't have a washing machine, sanitize the mask by boiling it for 10 minutes. Then, lay it out on a sanitized surface to air dry.^[18]

[Edit]Video

[Edit]Things You'll Need

• Fabric
• Floral wire or twisty tie
• Elastic (optional)
• Pattern
• Pencil or fabric chalk
• Sewing machine or hand sewing needle
• Thread
• Fabric scissors (or sharp scissors)
• Fabric pins

[Edit]Tips

• If you don't have a medical-grade mask, wear a simple medical mask if you’re a healthcare professional, you’re sick, or you’re caring for someone who is sick.^[19]

[Edit]Warnings

• Homemade medical masks aren’t as effective as medical-grade masks, which can block up to 95% of germs. Only use a homemade fabric mask if you don’t have access to a medical-grade mask.^[20]

[Edit]References

1. ↑ https://wwwnc.cdc.gov/eid/article/12/6/05-1468_article
2. ↑ https://www.youtube.com/watch?v=M19HtUhBcM8&feature=youtu.be&t=18
3. ↑ https://wwwnc.cdc.gov/eid/article/12/6/05-1468_article
4. ↑ https://www.joann.com/make-to-give-response/
5. ↑ https://www.coxhealth.com/innovation/masks/
6. ↑ https://www.coxhealth.com/innovation/masks/
7. ↑ https://www.coxhealth.com/innovation/masks/
8. ↑ https://www.allinahealth.org/-/media/allina-health/files/mask-sewing-how-to.pdf
9. ↑ https://www.coxhealth.com/innovation/masks/
10. ↑ https://www.coxhealth.com/innovation/masks/
11. ↑ https://www.coxhealth.com/innovation/masks/
12. ↑ https://www.coxhealth.com/innovation/masks/
13. ↑ https://www.coxhealth.com/innovation/masks/
14. ↑ https://www.coxhealth.com/innovation/masks/
15. ↑ https://www.allinahealth.org/-/media/allina-health/files/mask-sewing-how-to.pdf
16. ↑ https://www.allinahealth.org/-/media/allina-health/files/mask-sewing-how-to.pdf
17. ↑ https://www.health.state.mn.us/diseases/coronavirus/hcp/masksalt.pdf
18. ↑ https://wwwnc.cdc.gov/eid/article/12/6/05-1468_article
19. ↑ https://www.cdc.gov/coronavirus/2019-ncov/if-you-are-sick/steps-when-sick.html
20. ↑ https://wwwnc.cdc.gov/eid/article/12/6/05-1468_article