How to Clean Concrete Floors

Concrete is durable and versatile, making it a popular material for both interior and exterior flooring surfaces. Because it is stain-resistant and can be left plain and smooth or stamped with unique designs, concrete also offers a great deal of flexibility in terms of functionality and decor in a variety of spaces. Since concrete is porous, regular cleaning is necessary to prevent mold and dirt from building up. [1] The cleaning method does vary slightly depending on the type of concrete you’re working with, but proper maintenance will keep your floor clean and fresh, and help increase its longevity in your home, garage, shop, or workplace.[2]

[Edit]Steps

[Edit]Preparing Any Concrete Surface

  1. Gather your cleaning equipment. To do a basic cleaning of any concrete floor and to remove stains, you will need some basic cleaning supplies, including:
    Clean Concrete Floors Step 1 Version 5.jpg
    • A broom and duster (or a vacuum)
    • A nylon-bristled brush for scrubbing stains
    • Dish soap and water to remove stains
    • Trisodium phosphate, laundry bleach, and detergent to remove mildew
    • Kitty litter or cornstarch to remove grease stains
    • Degreaser to remove tire marks
    • Bleach, ammonia, or hydrogen peroxide for stubborn stains
  2. Clear the floor. Remove any furniture, decorations, rugs or mats, shoes, and anything else that’s on the floor. Move everything out of the room so you’re not cleaning around furniture or constantly having to move furniture around to clean.
    Clean Concrete Floors Step 2 Version 5.jpg
  3. Sweep and dust the floor. Get up all large dirt and debris with the broom, and then go over the surface again with a duster to remove fine particles and dust.[3] Dusting should be done daily, and sweeping or vacuuming on a weekly basis.
    Clean Concrete Floors Step 3 Version 5.jpg
  4. Spot clean stains. For regular food and beverage stains, scrub the area with hot, soapy water.[4] Use one to two tablespoons (15 to 30 ml) of a mild dish soap or Castile soap, diluted into a half-gallon (1.9 liters) of water. For oil or oil-based stains, wet the area with water and cover the stain with dish soap. Dip a brush in warm water and scrub the area to work up a lather. Blot the suds with a rag or towel and rinse it down with clean water.[5]
    Clean Concrete Floors Step 4 Version 5.jpg
    • To remove mildew, mix one ounce (28.3 grams) each of laundry detergent and trisodium phosphate with one quart (946.4 ml) laundry bleach and three quarts (2.8 liters) of water. Scrub the area with a soft brush and rinse with clean water.[6]
    • To remove tire marks (in a garage), spray the area with water and apply a degreaser. Let sit for three to four hours, scrub with a brush, and rinse.[7]
    • To remove grease, spread kitty litter or cornstarch over the area and let it sit for about three days. After you’ve let it sit, vacuum or sweep up the kitty litter and dispose of it in accordance with the type of grease it was (such as in the garbage or through a proper recycling facility).[8]
  5. Use stronger cleaners for tough stains on plain concrete. If your concrete floor is plain and you don’t have to worry about damaging a finish, you can use harsher cleaners like bleach, ammonia, and hydrogen peroxide to clean stubborn stains.[9] Dilute one part cleaner in three parts water and spray on the affected area. Let it sit for about 20 minutes, and then scrub with a brush. Rinse the area with clean water.
    Clean Concrete Floors Step 5 Version 5.jpg
    • Always wear gloves and proper protective gear when using harsh cleaners, and make sure the room is well-ventilated.

[Edit]Cleaning Stamped or Polished Concrete

  1. Gather your supplies. You will need a mop and large bucket, warm water, and a mild, pH neutral cleaner.[10] Do not use ammonia, bleach, or any other highly acidic or alkaline cleaner, as it may damage the concrete finish.[11] Good neutral cleaners to use include:
    Clean Concrete Floors Step 6 Version 5.jpg
    • Mild dish soaps
    • Castile soap
    • Neutral stone cleaner
    • pH neutral floor cleaners or detergents
  2. Fill a large bucket with water. Use about one gallon (3.8 liters) of warm water. Stir in one-eighth to one-quarter cup (30 to 60 ml) of mild soap or pH neutral cleaner (or the amount recommended by the manufacturer).
    Clean Concrete Floors Step 7 Version 5.jpg
  3. Dunk a clean mop into the cleaning solution. Once it’s saturated, wring it out thoroughly. The mop should be only slightly damp for cleaning the floor: you want the water to dry quickly, and don’t want excess water sitting on the concrete.
    Clean Concrete Floors Step 8 Version 5.jpg
  4. Mop the floor in small sections. Start in a corner farthest from the door and make your way toward the door, cleaning small areas at a time. As you mop, frequently re-dip the mop in the water and wring it out thoroughly. Consider having an oscillating fan blow air into the room to help the floor dry quicker.
    Clean Concrete Floors Step 9 Version 5.jpg
  5. Remove excess soap or cleaner. When you have cleaned the entire floor, dump out your cleaning water, rinse the mop and bucket, and refill the bucket with clean, warm water. Mop the floor again in the same way with the clean water, dunking and thoroughly wringing out the mop often.[12]
    Clean Concrete Floors Step 10 Version 3.jpg
    • Start at the farthest corner and work toward the door again, working in small sections.

[Edit]Cleaning a Garage Floor or Exterior Concrete

  1. Gather your cleaning supplies. You will need a power washer, a push broom with stiff, nylon bristles, and a cleaning product, such as trisodium phosphate or other concrete cleaner. You can use a regular garden hose if you don’t have a pressure washer. Use the hose on full power with a high-powered nozzle.
    Clean Concrete Floors Step 11 Version 3.jpg
    • A pressure washer is recommended for this kind of concrete cleaning as it will do a better job. Pressure washers can be rented from home and garden or building stores.
    • Use a regular scrubbing brush with nylon bristles if you don’t have a push broom.
  2. Remove any moss or roots that have grown on exterior concrete. Pull them up with your hands and then sweep, hose down, or pressure wash the surface to remove dirt and debris.[13]
    Clean Concrete Floors Step 12 Version 3.jpg
  3. Spray the concrete. Open your garage door if applicable. Start at the end closest to the house and work your way toward the garage door or lawn. Use the pressure washer or hose and spray the floor in broad, sweeping strokes to remove dirt and debris. Be sure to spray corners, cracks, and crevices as well.
    Clean Concrete Floors Step 13 Version 3.jpg
  4. Cover the floor with a dusting of cleaner. Place your broom at one end of the garage or patio, and begin sprinkling cleaner on the floor starting at the other end, working your way toward the broom. Make sure the floor is still wet when you do this.[14]
    Clean Concrete Floors Step 14 Version 3.jpg
  5. Scrub the floor. Use your broom or brush to work the cleaner into the entire floor surface and lift out any dirt, grime, and debris.[15]
    Clean Concrete Floors Step 15 Version 3.jpg
  6. Rinse the concrete with clean water. Starting at the inside and working your way toward the open door or lawn, power wash away any excess cleaner and debris. Leave the door open and allow the floor to dry.
    Clean Concrete Floors Step 16 Version 3.jpg

[Edit]Protecting Concrete Floors

  1. Clean spills immediately. This will stop people from slipping on the floor and prevent staining. Wipe up spills with a clean rag or towel as soon as they occur.[16]
    Clean Concrete Floors Step 17 Version 3.jpg
  2. Seal the floor. A high-quality sealant will last a few years, so you should re-seal your floor every three to four years.[17] Sealing your concrete floor will protect it from scuffs and stains.
    Clean Concrete Floors Step 18 Version 3.jpg
    • Choose a sealant that’s right for your concrete surface.
    • Use water-based sealants for indoor flooring.
  3. Wax the floor. Not only will a wax finish protect the floor from dirt build-up, stains, and abrasion, but it will also protect the sealant underneath so it lasts longer.[18]
    Clean Concrete Floors Step 19 Version 3.jpg
    • Apply floor wax in a thin layer and spread it out with a rayon or microfiber mop. Re-apply every year or so.[19]

[Edit]Related wikiHows

[Edit]References

[Edit]Quick Summary

Comments

Popular Posts